请稍候...

Product

DownLoad Catalogue

  • Paramater
  • Standards
  • Installation
  • Download

Working Principle:

When media flow through the strainer, the filter screen in the strainer will block solid impurity particles in the media in the screen and allow clean fluid through the screen and dischare from the strainer outlet while the screen hole size can be adjusted based on the size of impurities.

 

Specifiction:

Bolt Cap;Matel screen(Brass/Bronze/Stainless Steel);Y type;

 

Technical Paramater:

Normal Size: 1/2"~18"

Pressure Rate: Class125/150

Working Temperature: 0℃~80℃

Working Medium: Water

 

 

 

Design: MSS SP-71;

Manufacture: Factory STD;

Face To Face: ANSI B16.10;

Flange: ANSI B16.1;

 

 

 

 

 

 

 

 

 

 

 

 

 

Installation Instructions:
1\ The valve’s rated parameters should match the equipment’s. Make sure that the valve’s rated flow satisfies the actual demand;
2\ The installer must be trained or experienced so as to operate the installation correctly;
3\ A thorough check after installation is needed to ensure no errors;
4\ The system should be cleaned after initial operation for a period of time(generally not longer than one week) so as to remove impurities and pollutants accumulated in the screen during initial operation of the system. Thereafter, cleaning should be conducted regularly. The cleaning frequency depends on working conditions;
5\ Use flange and the corresponding bolts that meet the standard to connect the valve;
7\ When installation, the direction of flow must accord with the direction of the arrow head on the valve body.

 

 

 

Y-Strainer(ISAXRF-YT)